New from Hughes & Kettner Introducing the Edition Tube 20th Anniversary All Tube Combo

 

The Edition Tube 20th anniversary was introduced last year to celebrate Hughes & Kettner's 20th anniversary with a deluxe version of one of their most successful all-tube combos. Compact and easy to handle, this mighty mite serves up big inspiring tone you wouldn’t expect from a combo this small! Its two channels cover the full spectrum from vintage clean to bluesapproved crunch and rock lead cream. Edition Tube delivers the goods with authority and quality persuasive enough to convince hardline purists. A key factor in this amp’s sweet sound is the power amp and special design of the enclosure.

 

The two EL84 tubes supply smooth saturation and compression even at moderate levels, and the combo’s closed back enhances low-end response for a sound far bigger and punchier than its size suggests. Plug into Edition Tube 20th anniversary and keep celebrating for decades to come!

 

In stock from Tradition Guitars, this beautiful Honeyburst Archtop 750-H with a gorgeous flame maple back and sides, pearloid pickguard, Amber tuning pegs and gold plated hardware.  This is a beautiful sounding and easy to play instrument.  Stop in and play this incredible guitar.

 

 

Also in stock from Tradition, Jerry Reid Jr's in Cherry Sunburst and Solid Cherry.  These instruments are the real deal.  Incredible playability and sound for not too much change.

 

 

 

The Seymour Duncan Pickup Booster.

 

The first effects pedal designed specifically to work together with the pickups in a guitar to achieve optimum gain and resonance for all tonal applications. Works with all musical styles.

 

By rotating the gain control knob you can add pure, flat-EQ gain, ranging from 6dB to 25dB! The Resonance Switch drops the resonant peak of a single coil pickup up to 5KHz, making a single coil sound like a full and fat humbucker. Features fully discrete Class A circuitry along with true bypass. Comes in a heavy-duty steel chassis and runs on a single 9 volt battery.

 

For Resonance Switch to work properly, the
SFX-01 must be first in the signal chain using passive pickups and a standard guitar cable — not a wireless unit.

 

Gain range: 6 to 25 dB
Pickup Resonance Switch: Makes a single coil sound like a vintage humbucker ("1") or high output humbucker ("2").
"1" - Resonance shift down 2-3kHz
"0" - Resonance is not affected
"2" - Resonance shifts down 3-5kHz
Bypass: True bypass
Noise: -120 dBV (referred to input with gain set at 25dB)
Type of circuitry: Fully discrete, class A
Distortion: < 0.1%
Power: DC 9-12 V battery, or regulated DC adapter
Current consumption: 3.5mA @ 9V (when LED is "on"), 1.5mA @ 9V (when LED is "off")
Input impedance: 500K (when effect is "on"), Open (when effect is "off")
Output impedance: 5K ohms
Dimensions: 2.5" x 5" x 2" (W x L x H) (6.35cm x 12.7cm x 5.08 cm)
Weight: 0.8 lb. Without battery, 0.9 lb. With battery
Chassis material: Heavy duty 1.6 mm steel

Guitarists and bassists have been demanding a foot pedal version of the legendary BBE Sonic Maximizer and the wait is finally over! In stock the BBE Sonic Stomp.

Many musicians don't have a spot for the rack mount unit, but long for the legendary clarity, definition and punch that only a Sonic Maximizer can provide. BBE took heed and carefully designed the Sonic Stomp foot pedal which delivers the same amazing sonic improvement as our popular 482i Sonic Maximizer.

Other features include hard-wire bypass, non-slip rubber bottom, easy-access 9v battery compartment and
included external power supply.

Sonic Stomp Specifications:
Frequency Response: Program Dependent
BBE: Lo Contour +12dB @ 50Hz
Process +12dB @ 10kHz
Signal to Noise Ratio: BBE on Max 94dB
BBE on Min 104dB
THD: 0.02% at 1kHz
Noise: BBE on Max -87dBu
BBE on Min -97dBu
Max Signal Level +7dBu
Input Impedance: 1MEG Ohms
Output Impedance: 1K Ohm
* 0dBu = 0.775Vrms
Hardware Bypass: YES
Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 15 hours

* 0dBu = 0.775Vrms

In stock from Digitech, The Jimi Hendrix Experience™, the only pedal to capture the tones that changed guitar playing forever. The pedal was created using the original masters at Electric Lady Studios in association with Eddie Kramer, the original recording engineer. The Jimi Hendrix Experience pedal so closely models the fine nuances of Jimi’s sounds that each pedal requires TWO of our AudioDNA™ DSP chips!

Eddie Kramer, Jimi’s engineer at Olympic and Electric Lady Studio, was an essential part of the Hendrix sound. Who better to help recreate those timeless tones than the man who set up the original mics and ran the mixing board adding his own magic? Working with DigiTech and their proprietary Production Modeling technology, he helped rebuild each facet of Jimi’s tone, from guitar effects and amp to the vintage outboard signal processors.

But it gets even better. Thanks to Eddie and the Hendrix family, Digitech was able to use the original tapes as a reference source for their Production Modeling technology. The results of this once-in-a-lifetime project will amaze you when you hear the Jimi Hendrix Experience™ pedal.

Also in stock from Digitech

Jam Man Looping Pedal

BP50 Bass Multi-Effects Pedal

 

Randall G3 Series "Valve Dynamic" Combo's at the Haus

 

We're thrilled to have the new G3 series at the Haus.  In stock we have currently the

 

RG75DG3 - 75 Watt, 1-12 Combo with Digital Effects

RG75G3 - 75 Watt, 1-12 Combo

RG200G3 - 200 Watt, 2-12 Combo

 

 

The completely amazing new Randall G3 Valve Dynamic Combos feature:

  • 6-digital effects with independent level controls
  • 2 channels w/3 modes
  • Gain 1: Classic hi-gain
  • Gain 2: Modern hi-gain

  • lean channel w/boost option

  • Dual 3-band EQ's
  • 12AT7 tube driven MOSFET power circuit  
  • Effects loop w/level controls
  • Line out
  • RF4G3 foot controller included

Breaking the tone barrier between Tube and FET has been a challenge to most amp designers for a long time.  But, during the recent development of the new V2 and T2, we made several ground breaking discoveries that allowed us to narrow in as to why tube power reacts and feels so much differently than a traditional solid-state power amp.  Those discoveries, as you’ll hear this year, resulted in the revolutionary new “Valve-Dynamic™” power section.

Incorporating a single 12AT7 tube to drive a large Mosfet output circuit, this highly advanced power circuit has a natural compression which clips extremely soft at higher volumes reacting very much like a traditional power tube.  The key or secret to this new circuit however, was capturing or emulating the true frequency response curve of a standard power tube which has very unique characteristics to that of solid-state power amp.  The new Valve-Dynamic circuit not only captures a tubes reactive qualities, but also the warmth, feel, and musical character of full tube power amp, but with the durability of a 400 watt Mosfet power amplifier.