Built into Rocktron’s usually strong aluminum chassis, the X-Tune allows muting for silent tuning, and continuous out for live tuning. The X-Tune handles 12 Note tuning and a 7 octave range. A calibration switch is provided. Note Indicator LEDs show the actual note being tuned. A row of notes will actually light up when the X-Tune is turned on, and during tuning the LED under each note being tuned will light up. A Flat Indicator LED will flash if the note being played is flat. The more “flat” the note is, the faster the LED will flash. An In Tune LED will light when the note being played is actually “in tune”. A Sharp Indicator LED will flash if the note being played is sharp. Again, the more “sharp” the note is, the faster the LED will flash.

The X-Tune includes a Calibration Button which is used to calibrate the unit to match the pitch of any instrument or audio source (like a piano or tape player). The X-Tune includes a Continuous Output Jack (Out To Amp) allowing you to connect a standard guitar cable with a ¼” jack to your next effect or directly into your amplifier if you want to hear the note being tuned.The X-Tune includes a Mute Silent Tuning Jack allowing you to mute the output of your guitar going to your amplifier or next stomp box so that you can tune in silence. An On/Off Switch determines whether the X-Tune is “on” or “off” and the Blue LED will light when the unit is on. An easy-access 9 Volt Battery compartment is on board, as with most Rocktron pedals.

BBE at the Haus!

BBE Acoustimax Acoustic Preamp

BBE is at the forefront of audio technology which allows amplified music to sound more natural, and the latest generation of BBE High Definition Sound technology is a vital element to the new Acoustimax acoustic preamp. In the four years since BBE last offered its award-winning 386 acoustic preamp, BBE’s design and engineering team studied the serious acoustic player's needs for both recording and sound reinforcement. The result is Acoustimax, a foot-pedal-style (or “stomp-box-style”) acoustic preamp which raises the bar for amplified acoustic instrument sound quality. Acoustimax is packed with features including three band, recording-console quality eq with a sweepable mid -range band, low frequency notch filter, phase reversal, ground lift, line level out, dedicated tuner out and TRS effects loop, even a pre/post switchable-balanced DI output with pad. Other features include hard-wire bypass, non-slip rubber bottom
and the included 12v power supply.

Acoustimax Specifications:

Frequency Response: 50Hz - 20kHz
Treble: +/-12dB @ 10kHz
Mid: +/-12dB @ 400Hz - 2.5kHz
Bass: +/-12dB @ 60Hz
Notch: 0 to -12dB @ 70Hz - 250kHz
BBE: Lo Contour +15dB @ 50Hz
Process: +15dB @ 10kHz
Noise: Instrument Jack -98dBv (unity gain)
Line Out: -88dBv (+10dB gain)
Max Output: +10dBu @ Instrument Jack
THD: 0.05% at 1kHz
Impedances: Input 2.2 MEG Ohm
Tuner Out: 2K Ohm
Line Out: 1K Ohm
Instrument Out: 2K Ohm
XLR Out: 600 Ohm
Power Requirements: DC inlet +12VAC min. 200ma

* 0dBu = 0.775Vrms

Also in stock the amazing BBE Sonic Stomp!

Guitarists and bassists have been demanding a foot pedal version of the legendary BBE Sonic Maximizer and the wait is finally over!

Many musicians don't have a spot for the rack mount unit, but long for the legendary clarity, definition and punch that only a Sonic Maximizer can provide. BBE took heed and carefully designed the Sonic Stomp foot pedal which delivers the same amazing sonic improvement as our popular 482i Sonic Maximizer.

Other features include hard-wire bypass, non-slip rubber bottom, easy-access 9v battery compartment and
included external power supply.

Sonic Stomp Specifications:
Frequency Response: Program Dependent
BBE: Lo Contour +12dB @ 50Hz
Process +12dB @ 10kHz
Signal to Noise Ratio: BBE on Max 94dB
BBE on Min 104dB
THD: 0.02% at 1kHz
Noise: BBE on Max -87dBu
BBE on Min -97dBu
Max Signal Level +7dBu
Input Impedance: 1MEG Ohms
Output Impedance: 1K Ohm
* 0dBu = 0.775Vrms
Hardware Bypass: YES
Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 15 hours

* 0dBu = 0.775Vrms

Also in stock the amazing BBE Sonic Stomp!

Guitarists and bassists have been demanding a foot pedal version of the legendary BBE Sonic Maximizer and the wait is finally over!

Many musicians don't have a spot for the rack mount unit, but long for the legendary clarity, definition and punch that only a Sonic Maximizer can provide. BBE took heed and carefully designed the Sonic Stomp foot pedal which delivers the same amazing sonic improvement as our popular 482i Sonic Maximizer.

Other features include hard-wire bypass, non-slip rubber bottom, easy-access 9v battery compartment and
included external power supply.

Sonic Stomp Specifications:
Frequency Response: Program Dependent
BBE: Lo Contour +12dB @ 50Hz
Process +12dB @ 10kHz
Signal to Noise Ratio: BBE on Max 94dB
BBE on Min 104dB
THD: 0.02% at 1kHz
Noise: BBE on Max -87dBu
BBE on Min -97dBu
Max Signal Level +7dBu
Input Impedance: 1MEG Ohms
Output Impedance: 1K Ohm
* 0dBu = 0.775Vrms
Hardware Bypass: YES
Power Requirements:
DC inlet: +9VDC min. 200ma
Battery Life: 15 hours